For sliding gates 2000kg (RUN2000).
Ventilated motor with inductive limit switch (RUN2000P) or
Electromechanical limit switch (RUN2000).
Suitable to operate in extreme conditions, in systems for intensive use.
Simple to install: the Blue BUS system enables connections by means of just two wires between the control unit and up to15 control safely and signaling device.
Safe: the acceleration setting (at the start of the maneuver) and the declaration setting (at the end of the maneuver) are precise and reliable.
The temperature sensor: Run is able to manage force, adapting it to the different climatic and environmental conditions. While adapting the thermal cut-out protection and intensity of self-ventilation, depending on temperature reading.
A master/slave: selection also automatically synchronize 2 motors, enabling the automation of sliding gates with two opposing leaves.
Practical and functional: the control unit (and inverter on version RUN2000I), housed inside Run, can be simply connected by means of the practical connector guide.
Very quit: gear motor on bearings.
RUN2500I version with built-in inverter
Perfect movement: the inverter enables the power supply and drive of the 3-phase motor single-phase current at 230 Vac, acting on the frequency to adjust speed of the automation from a minimum of 8.2 m/min to maximum15.4 m/min. In the automation deceleration phase, the inverter, which dialogues with the control unit, increases the torque, thus improving performance and reducing the risk of the automation blocking on impact with obstacles.
|DIMENSIONAL AND GENERAL DATA|
|PROTECTION LEVEL (IP)||44|
|WORKING TEMP.||-20 ÷ +50|
|DIMENSIONS (mm)||400x255x390 h|