The detection distance of 8 meters meets the needs of most automatic doors. Laser light source, easy to calibrate and debug. And it is a polarized sensor, which can still accurately detect highly reflective objects. It is mainly used in industrial doors and intelligent parking fields.
PF50 series photoelectric sensor/photoelectric switch
Detailed product description
feature:
1) Stable performance
2) Standard volume
3) Convenient positioning and high precision
4) Various types to choose from
5) Wide voltage range
6) Dustproof, sunscreen, waterproof, high temperature resistant, adapt to bad weather
7) With short circuit protection and reverse polarity protection
8) One-piece design to prolong the service life
9) Using temperature-resistant, oil-proof resin inside
10) IP67 protection structure (IEC specification)
PF50 series photoelectric sensor is the best sell model, the product with an integrated molding process can be used both indoors and outdoors. The product with an aspheric optical lens can eliminate light interference effectively, Free voltage10-30V DC & 12-240V DC/AC for selecting which can meet customers’ different demands.
This Series includes through-beam type, Retro-reflective type, and diffused type, for reflective type there are infrared light and laser for selection.
PF50 series photoelectric sensor is mainly used for automatic doors, intelligent parking, turnstile gates, boom barrier for people, and vehicle protection
The product has three major features:
The detection distance of 8 meters meets the needs of most automatic doors.
Laser light source, easy to calibrate and debug.
And it is a polarized sensor, which can still accurately detect highly reflective objects.
It is mainly used in industrial doors and intelligent parking fields.
| Photoelectric sensor | PF50R-ARF-W |
| Detection Type | Retro-reflective |
| Detection Range | 0.5-8m (RP02) |
| Spot size | 8-9cm (at 8m distance) |
| Light Source | 650nm red laser |
| Supply Voltage | 10~30V DC |
| No-load Current | 60 mA max. @ 24Vcc |
| Power ripple | Vp-p =10%Ub |
| Response Time | Max.20ms |
| Control Output | Relay output |
| Action | Light on/Dark on for selecting by wire connecting |
| Indicator | Output indicator: Red; Power indicator: Yellow |
| Protection circuit | Reverse polarity protection |
| Ambient lightness | Sunlight:100000LuX;Lamp:3000LuX |
| Ambient Temperature | Working temperature:-30-50ºC; Storage temperature: -25-70ºC |
| Ambient Humidity | Less than 85% |
| Withstand voltage | 500VAC,1 minute, between electric parts and shell |
| Insulation resistance | >20MΩ,500VDC, between electric parts and shell |
| Vibration resistance | 0.5 mm amplitude, 10…55 Hz frequency, lasting for 1 hour at different directions |
| Shock resistance | 11 ms (30 G) 6 times shock at different directions |
| Material | Housing: ABS, Lens: PMMA |
| Protection Rate | IP67 |
| Cable | Φ5, 5×0.2mm² 2m |
| Accessory | Bracket: IB02, Screw: M4×25 |
Product installation:
The installation of the photoelectric sensor is relatively simple, as long as the sensor is installed on the fixing frame, does not be blocked by other things, and ensures the working state is good.
Product maintenance:
Carry out regular inspections to check its sensitivity and some relatively safe measures. The use of these measures is also the most primitive function of our equipment for protection. For the maintenance of the application switch, we still have to do that we need to regularly Scrub or remove some dirt because only in this way our switch will not have some problems with sensitivity. Although the product has IP67-level protection facilities, the product cannot be immersed in water for too long. Therefore, when the product is used outdoors, be sure to check the product after encountering heavy rain.
Optimized by Seraphinite Accelerator
Reviews
There are no reviews yet.