Automatic Sliding Gate Motor NICE-1500KG [Made In ITALY] Automatic Sliding Gate Motor NICE-1500KG [Made In ITALY]

Automatic Sliding Gate Motor NICE-1500KG [Made In ITALY]

(0)

Categories: Accessories, Automatic Gate System, Automatic Sliding Gate Operator, Motor For Sliding / Swing Gate, NICE Gate Operator, PRIME AUTOMATION

Automatic Sliding Gate Motor NICE-1500KG [Made In ITALY]

For sliding gates weighing up to 1500 kg.

Versions with electromechanical limit switch (RUN1500)

and with inductive limit switch (RUN1500P).

Use-friendly: the Blue BUS technology, enables to power and control a maximum of couples of photocells using two wires only.

Practical: the control unit and PS124 buffer battery (optional) Can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced: the temperature sensor adapts the motor force to weather conditions, setting the thermal cut-out protection accordingly; a master/slave selection automatically synchronizes 2 motors, enabling the automation of sliding gates

With two opposing leaves.

Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre. Sturdy: aluminium release handle for easy opening.

Very quiet: gear motor on bearing.

Description

Automatic Sliding Gate Motor NICE-1500KG [Made In ITALY]

CODE	DESCRIPTION	PAKE/PALLET
RUN1500	IRREVERSIBLE,24V dc, WITH BUILT-IN CONTROL 12 UNIT. WITH ELECTROMECHAL LIMIT SWITCH. FOR SLIDING GATES WEIGHING UP TO	1500 kg
RUN1500P	IRREVERSIBLE,24V dc, WITH BUILT-IN CONTROL 12 UNIT. WITH INDUCTIVE LIMIT SWITCH, FOR SLIDING GATES WEIGHING UP TO	1500 kg

TECHNICAL SPECIFICATION
CODE	RUN1500/1500P
ELECTRICAL DATA
POWER SUPPLY	230
ABSORPTION	2
POWER	400
PERFORMANCE DATA
SPEED	0.25
FORCE	1000
WORKING CYCLE	60
DIMENSIONAL AND GENERAL DATA
PROTECTION LEVEL	44
WORKING TEMP	-20 ÷ +50
DIMENSIONS	400x255x390 h
WEIGHT	19

Description

Nice Run 1500 24v sliding gate opener kit with electromechanical limit switch for sliding gates up to 1500kg and 14m.

Very quiet and smooth operation thanks to the gear motor on bearings.

Features

Safe and Intelligent

Fully compatible with Nice’s Solemyo solar power kit and Opera management system for GPRS and Bluetooth connectivity / operation
Connection for EN compliant 8.2K safety edges
The Nice Run series is equipped with a temperature sensor which adapts the motor force to the climatic and environmental conditions, while adapting the thermal cut-out protection and self-ventilation intensity depending on temperature readings.
A master and slave selection can automatically synchronise two motors, this makes it possible to automate 2-leaf sliding gates set opposite each other
Features an obstacle detection system and automatic programming of opening times, and acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre
The Run is capable of self-diagnosis, alerting the user to faults via flashing lights

Sturdy, Practical and User Friendly

The Nice BlueBUS system allows the connection of up to 15 control, safety and signalling devices to the control unit with just two wires
The control unit and backup battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor
The Run’s gear motor is on bearings, resulting in very quiet and smooth operation
Strong and sturdy pressure die-cast aluminium design with epoxy painting
Aluminium release handle for easy opening

What’s Included

1 x RUN1500 Motor with electromechanical limit switch (24v)
1 x RBA3 Integrated control unit
2 x ON2E Remote Controls
1 x EPMB Pair of Bluebus Photocells
1 x OXI Receiver